The use of flush fit doors in modern interior design has been quite a challenge for hinge manufacturers. SFS has tackled this challenge by providing an entire range of products that meet the requirements of both door manufacturers and architects.
The former are happy to use our products due to their ease of use and adjustment; the latter appreciate how our range emphasises their design potential, allowing them to realise their idea of interior design and furnishing solutions.
Two hinges with different aesthetics, one with a rounded design and the other with squarer shapes, which meet the requirements of modern interior design. Easy to install and particularly suitbale for industrial clients, thanks to their symmetry, their rotation point has been reinforced and their pin has been elongated to improve their seal.
Moreover, the square version has a self-lubricating bush, which makes the fixtures slide easily, keeping them squeak-free and maintenance-free. A 1mm nylon spacer, which can be applied to the frame, is available for possible adjustments whilst installing the door.
Brass, chrome and matt nickel coated finishes are the aesthetic options for these hinges.
CAB-R has an elegant, round and corrugated design. Its key features for flush doors are its two dimensional setting with its opening of upto 180 degrees and its symmetrical design, which means the CAB-R hinge is suitable for both left and right hanging doors.
The side adjustment to vertical is done with a 4mm A/F Allen key in the wing of the hinge, providing a +/- 3M™m adjustment range. The gasket pressure is set with a second 3M™m A/F Allen key on the frame section with a +/- 1.5 mm adjustment. The moving parts are fitted with maintenance-free bearings which guarantee a long problem-free working life. Two hinges can support 70 kg per door. The hinge system has been tested to 200.000 operating cycles with a resulting relaxation of 0.1mm. The cover caps, available in various colours, match the finishing of the doors
The innovative CAB-R 3D hinge has great design, quality and load support features and is available in a wide range of applications. The range fulfils both the aesthetic and engineering requirements of modern design for leading interior door producers and the needs of the end-user.
Available in two versions, short and long, the CAB-R-3D hinge can be adjusted with a single hexagonal key in all three directions (0/+3 mm in height, +/- 1.5 mm horizontally and +/- 2 mm gasket pressure). The door hinge can be fitted left or right and turned vertically and horizontally. Thus every technical product requirement is fulfilled with a single hinge design. The CAB-R 3D can be fitted to any 35 to 45 mm door with a simple milling operation. The CAB-R 3D has passed the 200,000 cycle test with an 80kg door with ease.
CAB square hinge with a square design it's easy to install and particularly suitable for industrial clients thanks to its symmetry; this version has a self-lubricating bush, which makes the fixtures slide easily, keeping them squeak-free and maintenance-free.
A 1 mm nylon spacer, which can be applied to the frame, is available for possible adjustments whilst installing the door. Available in different finishing.
The all-new, invisible CIR is all about simple, economical door hanging. Fully symmetrical, the hinge can be used for right or left-handed doors. CIR is a full system. As well as the hinge, we provide embellishing cover caps that are available in various colours and can be applied inside the jamb and the milling template.
Adjustments are carried out once the door is mounted, using simple allen keys. The sash part allows lateral door adjustment up to +/-3mm, whereas the frame part allows depth adjustment by +/-1.5mm. The maintenance-free bearings ensure sliding and prevents squeaks and guarantees a long problem-free working life. Technically reliable, this new invisible hinge has been tested in 200,000 cycles with a 70kg door.