Jesteśmy wiodącym producentem zawiasów do drzwi i okien. W naszej ofercie posiadamy rozwiązania przeznaczone do drewna, PCV, stali, aluminium i szkła.

Zastosowanie zawiasów

Więcej o naszych zawiasach

Posiadamy szeroki zakres wysokiej jakości zawiasów do rozwiązań standardowych. Oferujemy również możliwość zaadaptowania naszych produktów do indywidualnych potrzeb klienta.


Our hinges are produced in various materials and adapted to market needs.

Material selection for climatic zones

We recommend the following materials for hinges in different climatic zones:

1. In aggressive climates, where there is a high potential for corrosion, we recommend the use of INOX hinges.

2. In critical climates, such as coastal regions, we recommend the use of brass hinges, but for a more superior performance level and specification: stainless steel.

3. In neutral climate zones, we recommend the use of stainless steel hinges, although for a higher specification, brass and for the highest specification level - INOX hinges.

Zabezpieczenie powierzchni

Corrosion protection performance of the most common surface coatings

In addition to the listed standard surface coatings, other surface coatings are available on request.

Kryteria wytrzymałościowe

All hinges from SFS satisfy requirements of the EN 1935 testing guidelines when the “recommended loads” are imposed. Besides the shear strength test and the static load test, which are required by the standards, our hinges are submitted to a durability test with 200,000 movement cycles. The durability test follows this process:

1. Load the hinged test element to the mass according to the class of hinge under test.

2. Measure and record the initial horizontal and vertical distances between the hinge elements and the defined reference surfaces.

Testowanie obciążenia bolców

All SFS adjustable hinges, which have a threaded bolt on a rotating bearing, conform to the quality standards described below:


Apply force of 6000 N to the threaded bolt in the axial direction, as illustrated.


The threaded bolt bearing must not sustain any measurable changes. The threaded bolt can still be rotated easily after the test.

Bolce gwintowane 3-stopniowo

The special 3-step threaded bolt (patent protected) anchors the hinge securely in the profile and ensures optimum load-bearing capacity.

The three functional steps of the threaded bolt, the dedicated step drill and SFS's fitting tools permit fast and problem-free fitting of the hinge.

Pilot hole produced with the matching step drill.

Step 1 of the threaded bolt is inserted in the pilot hole. Since the entire length of the bolt does not have to be screwed in, fitting time is reduced. The reduced pilot hole diameter centres the threaded bolt automatically. There is no tilting or skewed insertion.

Screwing the threaded bolt in to step 2.

The well-formed buttress thread forms a perfect fit in the wood and produces optimum anchoring values.

Since the borehole matches the threaded bolt, the latter is anchored securely in the profile over its entire length.

Step 3 compresses the profile. The close-fitting cylindrical section ensures maximum load-bearing capacity of the hinge.

If the diameter of the threaded bolt's rear section is the same as the core diameter of the thread, this has an adverse effect on the load-bearing capacity of the hinge. There is no form-fit anchoring just where the largest load is applied.

SFS's hinges can also be readjusted at any time. This is only possible in one direction with tapered threaded bolts.

Wysoki poziom jakości

Do pobrania


SFS Group Sp. z o.o.
ul. Torowa 6
PL-61-315 Poznan
T +48 61 660 49 00
F +48 61 660 49 10

Doradcy Techniczno-Handlowi

Andrzej Krawczuk
Tel: +48 606 912 102

Przemysław Marjanowski
Tel: +48 690 552 770