The TIT fastening system sets new standards in flat roof attachment


Material:

Screw:
Surface:		Carbon steel, case hardened
Durocoat, at least 15 Kesternich cycles (DIN 50018)

Application:

Adjustable fastening system for attaching flat roofs to thin walled concrete structures.


Advantages:

The TIT fastening system sets new standards in flat roof attachment
  • only 1 fastener for differing thickness of roof build up
  • each fastener can accommodate a build up range of 50 - 160 mm or 70 - 280 mm
  • no penetration of the concrete structure
  • removable fastening system




Installation process


1. Pilot drill a 20.0 mm dia. hole through the existing roof build-up using a carbide drill bit
2. Drill a 4.8 mm dia. hole in the concrete structure
3. Insert sleeve in the pre-drilled hole and insert fastener in sleeve
4. Screw fastener through sleeve into concrete with applied pressure
5. Tighten sleeve if necessary (clockwise if the sleeve head is not completely flush)


Installation tools for optimum efficiency






DB 620:
SDS:
DI 600:
IF 80:		Hammer drill
Hammer drill
Screw driver
Setting tool


The hammer drill DB 620 is the ideal tool for drilling into concrete. With special accessory the DB 620 can also be used to install spike fasteners with little effort.

Please click here for technical information and accessories.

  Print
  Close window