EXTRUDE-TITE® 2000™

Safe and economical fixing in the plates with SFS intec EXTRUDE-TITE® 2000™



The SFS intec EXTRUDE-TITE® 2000™
has been specially designed for thin plate.


  • no need to pre-form a sleeve
  • powerful load-bearing thread
  • low insertion depth thanks to the special tips

EXTRUDE-TITE® 2000™ enables light self-centring
and the formation of a threaded sleeve in a single
operation.


SFS intec EXTRUDE-TITE® 2000™ fasteners form their own through-bore as they are screwed into thin plate.



New with EXTRUDE-TITE® 2000™:

The radius profile of the tried and trusted TAPTITE 2000® has been taken over. Combining this form with the trilobular section reduces the insertion torque even further.

The EXTRUDE-TITE® 2000™ features a conical profile under the head. A matching clamping washer reduces the over-tightening torque enormously, so the gap between normal insertion torque and over-tightening torque is widened and assembly becomes quicker and easier.





Design options beneath the head further enhance the benefits offered by
EXTRUDE-TITE® 2000™

Stop tooth profileRing cutter profile


Bore dimensioning recommendations [mm]



Plate thickness
M2
M2,5
M3
M3.5
M4
M5
M6
0.50
1.00
1.20
1.40
1.50
1.80
0.63
1.10
1.30
1.50
1.60
2.00
2.60
0.75
1.20
1.40
1.60
1.80
2.30
3.00
3.50
0.87
1.30
1.60
1.80
2.10
2.60
3.30
4.00
1.00
1.40
1.80
2.00
2.40
2.80
3.70
4.50
1.50
2.20
2.60
3.10
4.10
5.00
2.00
3.50
4.50
5.40
DS
0.80
1.00
1.30
1.45
1.60
2.25
2.55
LS
2.00
2.50
2.80
3.30
3.90
4.40
5.50
DC
2.40
2.90
3.40
4.00
4.50
5.50
6.60

  Print
  Close window