Technical information: isofast IG/IW
isofast IG: for the fastening of waterproof membranes and insulation (min. compressive strength 0,07 N/mm²) to timber decks.
isofast IW: for the fastening of waterproof membranes to timber decks.
Oriented strand board minimum 18 mm. Type F2 to BS 5669/pt 3 1992.
Solid softwood minimum 22 mm thick.
Recommended design loads:
isofast IG: with stress plate IRD 82 x 40, 500 N per fastener
isofast IW: with stress plate IRC/W 82 x 40, 500 N per fastener
Both above with reinforced membranes otherwise 400 N per fastener
The design load can vary for each roofing system.
Please check with membrane manufacturers' data.
On refurbishment contracts pullout tests required.
Installation tools for optimum efficiency:
DI 600 screw gun