Stainless selfdrilling fasteners SL2-S and SL2-S-L12
SL2-S
SL2-S-L12
Material:
Fastener:
Austenitic stainless steel, grade 304 (European Standard 1.4301 or 1.4401)
Washer:
S = Stainless steel, grade 304 with vulcanised EPDM
Drill point:
Case hardened, special carbon steel
Drive:
SL2-S: Hexagon head, SW8 / SL2-S-L12: irius®-drive system
Application:
Stainless steel fastening of side laps and flashings.
The thread-free zone under the fastener head prevents stripping of the threads in the sheets. The sheets are pulled together tightly, clamped in the thread-free zone and sealed.
The fasteners can be used without depth stop or torque coupling.
Special features:
The newly developed underhead drive on the SL2-S-L12 self-drilling fastener is virtually invisible! This aesthetic SL2-S-L12 fastener head blends especially harmoniously with the cladding surface.
Advantages in installation:
optimum fastener guidance
no veering to one side by the fastener
fastener is clamped firmly in the E 420 setting tool
Fixing tool for easy installation: DI 600
The DI 600 power tool is the ideal way to install SFS power tool fasteners quickly and efficiently. Its light weight makes for fatigue-free working, while the high power and the practical depth gauge are made for direct fastening. Damage to expensive facades is avoided.
The E420 setting tool is required for installing self-drilling fasteners with the SFS irius system. The fasteners are clamped firmly via the teeth under the fastener head and parallel to the installation axis. The clamping jaws are also available separately as the E420 spare jaws kit.
Facades which make a statement with colour: colour-fast powder coated fasteners from SFS intec are available in a wide range of colours and can even be produced to match your sample colour.
