|
|
|
EXTRUDE-TITE® 2000™ |
|
|
Safe and economical fixing in the plates with SFS intec EXTRUDE-TITE® 2000™
|
The SFS intec EXTRUDE-TITE® 2000™
has been specially designed for thin plate.
- no need to pre-form a sleeve
- powerful load-bearing thread
- low insertion depth thanks to the special tips
EXTRUDE-TITE® 2000™ enables light self-centring
and the formation of a threaded sleeve in a single
operation. |
SFS intec EXTRUDE-TITE® 2000™ fasteners form their own through-bore as they are screwed into thin plate.
New with EXTRUDE-TITE® 2000™:
The radius profile of the tried and trusted TAPTITE 2000® has been taken over. Combining this form with the trilobular section reduces the insertion torque even further.
The EXTRUDE-TITE® 2000™ features a conical profile under the head. A matching clamping washer reduces the over-tightening torque enormously, so the gap between normal insertion torque and over-tightening torque is widened and assembly becomes quicker and easier.
Design options beneath the head further enhance the benefits offered by
EXTRUDE-TITE® 2000™
| Stop tooth profile | Ring cutter profile |
Bore dimensioning recommendations [mm]
Plate thickness | M2 | M2,5 | M3 | M3.5 | M4 | M5 | M6 |
0.50 | 1.00 | 1.20 | 1.40 | 1.50 | 1.80 |  | |
0.63 | 1.10 | 1.30 | 1.50 | 1.60 | 2.00 | 2.60 | |
0.75 | 1.20 | 1.40 | 1.60 | 1.80 | 2.30 | 3.00 | 3.50 |
0.87 | 1.30 | 1.60 | 1.80 | 2.10 | 2.60 | 3.30 | 4.00 |
1.00 | 1.40 | 1.80 | 2.00 | 2.40 | 2.80 | 3.70 | 4.50 |
1.50 | | | 2.20 | 2.60 | 3.10 | 4.10 | 5.00 |
2.00 | | | | | 3.50 | 4.50 | 5.40 |
DS | 0.80 | 1.00 | 1.30 | 1.45 | 1.60 | 2.25 | 2.55 |
LS | 2.00 | 2.50 | 2.80 | 3.30 | 3.90 | 4.40 | 5.50 |
DC | 2.40 | 2.90 | 3.40 | 4.00 | 4.50 | 5.50 | 6.60 |
|
|
|
|
|
|
|
|
